Paint Correction and Ceramic/Graphene Coating

Paint Correction

Buffing and Polishing out scratches

It is recommended that a 1 Stage polish is performed prior to application in order for the coating to properly adhere to the surface area. The coating is only as good as the finished surface. The key is to make sure the finish is in as perfect condition as possible before application.

(All Vehicles Featured on this page have had at least a 1 Stage Correction and an Application of Ceramic or Graphene Coating.)

1 Stage Polish:

This is a one step polish that will remove light scratches and swirls, restore gloss and enhance the finish of the paint. Also referred to as paint enhancement. (one pad and polish combination).

2 – 3 Stage Correction:

This will remove up to 90% of paint imperfections. This process includes a 2 – 3 step polishing process to bring out as many scratches, swirls, imperfections as Possible. (2 -3 different pad and compound/polish combinations).

Ceramic (Sio2) and Graphene (GO) Coatings

Extremely Hydrophobic Coatings

Ceramic (Sio2) Coatings

Ceramic (SiO2) Coatings have one purpose – protect the paint. … When applied properly, SiO2 interacts with the clear coat and bonds with the paint creating an additional layer of protection that adds a few microns of thickness per layer. Some brands can be layered multiple times to increase thickness.

Ceramic Graphene (Graphene Oxide) Coatings

Graphene coatings are coatings with graphene molecules grafted onto the ceramic backbone. If you think of the graphic of the graphene oxide, the tails you see sticking up are what is grafted onto the ceramic molecule. The Ceramic molecule bonds with the car, and the graphene portion of the molecule is on top, forming the surface of the coating.

Call for a Free Quote

ALL COATINGS REQUIRE WASH AND PREP. ALL PRICING IS
SUBJECT TO CHANGE ON A JOB TO JOB BASIS DEPENDING
ON PREP TIME AND WORK REQUIRED. DEPOSIT MAY BE REQUIRED AT TIME OF BOOKING.

Terms & Conditions